材料と環境 Vol. 59 (2010), No. 6
Backnumber
-
Vol. 73 (2024)
-
Vol. 72 (2023)
-
Vol. 71 (2022)
-
Vol. 70 (2021)
-
Vol. 69 (2020)
-
Vol. 68 (2019)
-
Vol. 67 (2018)
-
Vol. 66 (2017)
-
Vol. 65 (2016)
-
Vol. 64 (2015)
-
Vol. 63 (2014)
-
Vol. 62 (2013)
-
Vol. 61 (2012)
-
Vol. 60 (2011)
-
Vol. 59 (2010)
-
Vol. 58 (2009)
-
Vol. 57 (2008)
-
Vol. 56 (2007)
-
Vol. 55 (2006)
-
Vol. 54 (2005)
-
Vol. 53 (2004)
-
Vol. 52 (2003)
-
Vol. 51 (2002)
-
Vol. 50 (2001)
-
Vol. 49 (2000)
-
Vol. 48 (1999)
-
Vol. 47 (1998)
-
Vol. 46 (1997)
-
Vol. 45 (1996)
-
Vol. 44 (1995)
-
Vol. 43 (1994)
-
Vol. 42 (1993)
-
Vol. 41 (1992)
-
Vol. 40 (1991)
キーワードランキング
21 Nov. (Last 30 Days)
材料と環境 Vol. 59 (2010), No. 6
実不働態皮膜から人工不働態皮膜へ,そして再び実不働態皮膜へ
原 信義
pp. 212-218
DOI:
10.3323/jcorr.59.212抄録
Studies of passive films on stainless steels are reviewed from the viewpoint of developing new resources-saved stainless steels (green stainless steels). Starting from the overview of the results of in-situ analyses for the thickness and chemical composition of real passive films, there are describing some important findings obtained from the model experiments using artificial passive films and ion-beam-sputter deposited Fe-Cr thin films, which simulate real passive films and ideal stainless steels, respectively. Finally, recent studies on the pit initiation mechanism at sulfide inclusions and on the improvement of pitting resistance by removal of the inclusions from steel surface are introduced to demonstrate a possibility of developing green stainless steels.
Ni基耐食合金の耐すきま腐食性におけるTaの添加効果
坂井 広和, 菅原 克生, 斉藤 仁志
pp. 222-227
DOI:
10.3323/jcorr.59.222抄録
The effects of small amount of tantalum addition to a Ni-Cr-Mo alloy on crevice corrosion resistance in 25% NaCl at 107°C was investigated quantitatively by measuring the repassivation potentials for corrosion crevice (ER,CREV). Upon the results, tantalum was revealed to shift the repassivation potentials to the noble direction and the effect was much more than the chromium or molybdenum. For the tantalum free alloys, the crevice corrosion resistance was found to correlate closely with the Pitting Resistance Evaluivalent number (PRE=[%Cr]+3.3([%Mo]+0.5[%W])), however, the tantalum containing alloys were against the correlation. Consequently, PRE(Ta)(=[%Cr]+3.3([%Mo]+0.5[%W])+7.7[%Ta]) was induced by adding a term of [%Ta] to the PRE equation. With this PRE(Ta), the crevice corrosion resistance for the tantalum containing alloys can be estimated.
Improvement of Weathering Resistance for Developed Thermoplastic Polyester Powder Coating for Telecommunication Plant
Yukitoshi Takeshita, Takao Handa, Tamotsu Kudo
pp. 228-231
DOI:
10.3323/jcorr.59.228抄録
Corrosion is one of the most important problems, particularly in relation to outdoor telecommunication equipment. Some corrosion prevention techniques such as crevice corrosion prevention for stainless steel and protective coatings on galvanized steel have been developed. As regards the latter, we have already developed a duplex protection system that employs resin coating and a galvanizing technique. There has been a need for weathering resistance technology that can protect telecommunications plant materials against damage during long-term use. In this work we have tried to improve the performance under various weathering conditions, in particular under ultraviolet (UV) light, which can easily damage polymer materials. Some powder paints designed to protect against UV light were prepared, and their performances were evaluated both with accelerated UV testing (e.g. with a xenon arc device) and when subjected to natural sunlight outdoor exposure in Okinawa, which has the most severe UV light conditions in Japan. We found that the UV absorber clearly improved the resistance to UV weathering. In addition, we tested for corrosion resistance under severely corrosive conditions outdoors at a coastal location on Miyakejima Island, and found that no blistering, cracking or corrosion occurred at current exposure time.
論文アクセスランキング
21 Nov. (Last 30 Days)
-
-
-
-
Development of a Low-carbon Sintering Process Technology and Its Application to a Pilot-scale Sintering Testing
ISIJ International Vol.64(2024), No.13
-
凝固過程における溶鋼中からAl2O3上へのMnSの晶出挙動
鉄と鋼 早期公開
-
Molecular dynamics simulation of viscosity of the CaO, MgO and Al2O3 melts
ISIJ International 早期公開
-
-
凝固過程のミクロ偏析による溶質濃度分布の定量的理解
鉄と鋼 早期公開
-
-
Reduction and Carburization Behaviors of Iron Oxide Composite with Iron Carbide and Free Carbon
ISIJ International 早期公開
この機能はログイン後に利用できます。
下のボタンをクリックしてください。